When it comes to medications geared toward the treatment of lung and airway conditions and problems, inhaled treatments are perhaps the most common form of medicine. By administering the needed medications in this way, the patient is better able to experience relief quickly and effectively. Inhaled medications are able to deliver the medicine to the airway directly, which can be incredibly helpful for lung diseases of all kinds. Incredible advancements have been made in recent years when it comes to inhaled medications and, today, both patient and doctor are able to choose from a wide variety of inhalation delivery systems.
What is the metered dose inhaler?
The metered dose inhaler, or MDI, is a pressurized canister that is contained within a plastic case. Attached to this case is a mouthpiece or ComfortSeal mask by which the medicine is administered. A metered dose inhaler ensures that the individual is able to control exactly how much medicine is inhaled per dose. This ensures that they always reliably get the correct dose of medication, no more, no less.
What is an AeroChamber®?
A medical AeroChamber® is a plastic tube that is used at the "end of an inhaler" as a means of holding the medication mist so that the user can effectively inhale the medicine, as needed. It serves as a holding chamber with a mouthpiece and valve on one end and a soft sealed end on the other through which the MDI is placed. The medical AeroChamber® is easy to use, convenient, and portable in size, making it a highly desirable means of medication delivery.
Why might a medical AeroChamber® be necessary?
One of the tricky aspects of an inhaler is the timing. In order to properly administer the medication, the user must inhale at the exact time that the medication is released. This can be particularly tricky for those who are not familiar with inhalers or for children. The medical AeroChamber® takes the timing challenge out of the picture. By effectively storing the medication mist in the chamber, the user is able to breathe normally and inhale the medication more effectively. This allows for the medication to be able to better reach the lungs and the smaller airways in the body.
How do you assemble an AeroChamber®?
Attaching an AeroChamber® to your MDI is actually quite simple and can be accomplished in the following steps:
- Remove the caps from both the AeroChamber® and the mouthpiece of the inhaler.
- Make sure there are no foreign objects in the AeroChamber®.
- Place the inhaler's mouthpiece into the soft sealed end of the AeroChamber®.
- Shake the whole device to mix the medication.
How do you use the inhaler and AeroChamber®?
The AeroChamber® was created as a means of making inhalation treatments easier to administer, and that's precisely what it accomplishes. To use an AeroChamber®, you'll want to:
- Gently exhale prior to use.
- Place the mouthpiece in your mouth and close your lips around it securely.
- Press the inhaler once for the medication to be released into the AeroChamber®.
- Breathe in deeply for between three to five seconds
- Hold your breath for ten seconds to allow the medication to deposit in lungs and airways.
- Repeat as prescribed.
How do you care for and clean an AeroChamber®?
Cleaning your AeroChamber® is absolutely essential as it prevents the buildup of powder. To clean properly, follow these directions below.
- Remove the rubber seal end and the mouthpiece attachment, if needed
- Soak all parts in lukewarm water with a mild liquid detergent.
- Swish in the water to make sure parts are thoroughly cleaned.
- Rinse in clean water.
- Air dry in an upright position.
- Once dry, reassemble the parts.
As an alternative, you can also place in the dishwasher on the very top rack as long as you're sure that your dishwasher will never get above 158 degrees fahrenheit. It's important to note, also, that you should never sterilize or boil an AeroChamber® as this can damage the material.
What is the Monaghan AeroChamber Plus?
The Monaghan AeroChamber Plus Z STAT Anti-Static Valved Holding Chamber featuring a Flowsignal Whistle is designed to improve the delivery of medications when connected to an MDI. Along with reducing the need for exact timing of inhalation on the part of the user, the Monaghan AeroChamber Plus also makes use more convenient and reduces the occurrence of medication deposits in the mouth and throat. This has a number of benefits in and of itself, not the least of which is the fact that patients report experiencing fewer lingering tastes and hoarseness of the voice.
What is the aVHC?
The Anti-Static Valved Holding Chamber of the Monaghan Z STAT consists of a design that centers around the convenience of the patient. It consistently provides reliable doses of medication similar to the MDI. It is highly useful for those individuals with chronic asthma as it ensures that the medication can be easily delivered to the airways quickly and efficiently during an attack.
How does the AeroChamber® Z STAT aVHC work?
The AeroChamber Plus Z STAT aVHC improves efficiency and maximizes the delivery of the medicine to the lungs and airways by separating the large and small medication particles. When the person inhales, the smaller of the particles float through the one-way valve in the chamber. They are then able to pass through the mouth and into the respiratory system where they can be of the most benefit to the lungs and airways.
Any other particles that remain are held by the Monaghan Z STAT. This allows the user to be able to take additional breaths for each puff of medication. This is particularly useful for those who struggle to or cannot obtain a high PEF, or peak expiratory flow. This assures that the maximum amount of medication in each puff is able to get to the lungs. This improves efficiency and provides maximizes benefit.
What are some of the key advantages to using a Monaghan Z STAT aVHC?
There are a number of advantages to choosing the Z STAT. This device:
- Is cost effective.
- Can be used right out of the box.
- Features a proprietary valve design that maximizes aerosol suspension time in order to provide proper dose assurance.
- Optimizes delivery for consistent delivery of the medication.
- Is easy to clean and dishwasher safe.
- Features a low-resistance valve.
- Is compatible with the vast majority of MDIs.
- Is BPA, Lead, and PVC-free.
The Monaghan Z STAT comes recommended by most MDI manufacturers and is designed and manufactured in the United States, with the exception of some of the silicone parts.
What are some of the special features of the Monaghan AeroChamber®?
The Monaghan Z Stat has a number of premium features that makes it easier to use, more efficient, and more accurate in dosage. Some of the highlights of this product include:
- A clear chamber to properly identify the activation of the MDI.
- Optimal aerosol formulations due to the improved Monaghan Z Stat aVHC.
- An aerodynamic design with advanced valves that filters large and small particles.
- A one-way valve keeps medication mist secure until it can be properly inhaled.
- Its delivery of up to twenty two percent more medicine than your average inhalation system.
- A universal adapter that allows for its use with most MDIs.
- Its delivery of consistent and high-performance medication delivery.
- A durable chamber that is composed of flexible, shatterproof plastic.
- A flowsignal whistle that notifies the user when inhalation is too fast.
- A more effective means of getting inhaled medication into the lungs and airways.
The Monaghan Z Stat anti-static chamber also reduces static charge, which helps to maximize the performance of the MDI and medication delivery. The end result of the Monaghan Z Stat is an inhalation medication delivery system that provides a more effective means of getting inhaled mist into the airways and lungs.
The Monaghan Z Stat is easy to use and comes with comprehensive instructions. It is ideal for both adults and young adults, and can be easily mastered even by those who are not familiar with inhalers and their use. The Monaghan AeroChamber can be used with either a mouthpiece or with a ComfortSeal mask.
How do you use the AeroChamber Plus?
The AeroChamber Plus can be conveniently used with either a mouthpiece or a ComfortSeal mask. To use:
- Remove the cap.
- Look for and clean out any foreign objects in the AeroChamber Plus.
- Insert the inhaler into the rubber-sealed end of the AeroChamber.
- Shake the AeroChamber Plus and the MDI well.
- Insert the mouthpiece into mouth or place ComfortSeal mask on the face, making sure to maintain a seal throughout use.
- Depress the inhaler to begin inhalation and begin breathing deeply.
- Breathe in and out slowly for approximately five breaths.
- Pay attention to the whistle; if a whistle is heard, slow down inhalation.
What is the Monaghan Z STAT cleaning process?
For Monaghan Z STAT cleaning, the following easy Monaghan Z STAT cleaning steps should be followed. To properly initiate Monaghan Z STAT cleaning,
- Remove the back piece for Monaghan Z STAT cleaning.
- Soak all parts, including the ComfortSeal mask and mouthpiece, in lukewarm water with mild, liquid detergent.
- Shake out any excess water and allow to air dry in an upright position.
- Replace parts only when it is dry and the Monaghan Z STAT cleaning process is complete.
Sources
Not all devices are equally effective in delivering asthma control
Drug delivery characteristics of metered-dose inhalers
The Proper Use of Metered Dose Inhalers
On to you
With the options listed above to help support medicine delivery, we hope you found this information valuable. What additional questions do you have for us? Please leave us a comment below or call us directly and we’d be happy to assist you with any questions you have.
-Marc Kaplan
CEO, Save Rite Medical
____________________
Marc Kaplan is Founder and CEO of Save Rite Medical, the leading online provider of medical supplies. While Marc supplies the greatest service and deals, he also provides a wealth of educational information for his customers.
